GCash. Credit or Debit card. Charge to load.
How to activate Globe at Home modem?
To activate the device, download the Globe At Home app via the Google Play Store for Android or the App Store for iOS. Once installed, enter the Home Prepaid WiFi number found at the back of your modem device. This instantly activates your modem.
How do I activate my WiFi modem?
Prepare your Modem Info. Disconnect Current & Connect New Modem. Confirm Internet Access. Activate your new modem. Return your rental modem equipment. Check your next billing statement for a discount.
How do I access my Globe modem?
Visit http://192.168.254.254/ to access the modem dashboard. Click log-in on the upper right of the screen. Enter username and password found at the back of the modem. Go to the SMS tab inside the modem dashboard and create a new message.
How do I connect my Globe modem to WiFi Related Questions
How do I connect my modem directly to the Internet?
On the back of your modem, locate the port labelled either Ethernet or 1 or LAN1. Connect one end of the Ethernet cable to this port. Connect the other end of the cable to the Ethernet port on your computer to establish a connection.
Why is my modem not connecting to WiFi?
Internet & network Unplug the router and modem’s power cords from the power outlet for 15 seconds. Plug the power cords back in. Check that all cords and cables are secure at both ends. Wait a few minutes, until the lights on the modem and router are working right.
Why is my Globe modem not working?
Power: Check if the power cable is correctly plugged into both the modem and power source. Internet: Check if the power cable is correctly plugged into both the modem and power source. LAN: Check if the LAN cable is correctly plugged into the port. You can also try other LAN ports to see if they are working.
What is the username and password for Globe router?
Open your web browser and then key in your router’s default gateway: 192.168. 254.254. Type “user” as your username and password.
What is modem in Globe at home WiFi?
The newest addition to Globe’s roster of go-to prepaid WiFi devices is the Globe at Home Prepaid WiFi (HPW) LTE-Advanced which is a CAT 7 modem.
How can I know my Globe WiFi username?
Tap “Go to my modem inbox” to get the pin. *To find the location of the default username and password, tap “Find my username and password” button. STEP 4: Go back to the app and enter the security pin on the field.
How can I access my home modem?
You log into your router’s firmware through a browser. At the address field, type the IP address of your router. Most routers use an address of 192.168.1.1, but that’s not always the case, so you may first want to confirm the address of your router.
How do I reset my Globe WiFi router?
To reset a Globe router to defaults or revert it to its default factory settings, you need to press the router’s reset button. Globe routers have default configuration settings that are usually stamped at the back or underside of the routers.
How do I setup my own modem?
Connect the power cord to the modem, and then plug the other end into an electrical outlet. Note: If you’re replacing an existing modem, unplug the old modem from the electrical outlet, and then simply move the coax cable from the old modem to the new modem. Then, connect the new modem to the electrical outlet.
What lights should be on my modem?
The power light, downstream indicator, upstream indicator, online indicator, and link light on your modem should all be green. If your power light is yellow, it may be upgrading, so leave the modem on and give it a little time to do its thing.
Why is my Globe has no signal?
I have no signal Try to restart your mobile phone by turning it off and on. 2. Try to switch off your mobile phone and remove the SIM and battery pack for about 30 seconds, then return it to refresh the network connection. 3. Make sure airplane mode is turned off.
How do I fix no internet connection?
Restart your device. Open your Settings app and tap Network & internet or Connections. Depending on your device, these options may be different. Turn Wi-Fi off and mobile data on, and check if there’s a difference. If not, turn mobile data off and Wi-Fi on and check again.
How do I know if my Globe prepaid WIFI is working?
Check your signal indicator, it should be lit. If there are no lights, restart your device by turning off the modem and replugging. For better signal strength, position your modem near a window.
How do I get my WiFi username and password?
Make sure you’re connected to your WiFi network. In the taskbar, right-click the WiFi icon, and then select Open Network and Sharing Center. Next to Connections, select your WiFi network name. Select Wireless Properties. Select the Security tab. Select Show Characters.
How do I set my router name and password?
Open a web browser. Then type your router’s IP address into the search bar and press the Enter key. Next, enter your router’s username and password and click Sign In. Then click Wireless. Next, change your new WiFi name and password. Finally, click Apply or Save.
How do I set a username and password for my router?
Enter your router’s IP address into your favorite web browser. Log in with the default username and password (both admin, usually). Go to settings. Select Change Router Password or a similar option. Enter the new password. Save the new settings.